74% of dentists want an impression material that is better suited for all the cases they see - not just the ideal ones.1 To deliver on this clinical need, Aquasil Ultra+ impression material offers market-leading intraoral hydrophilicity and tear strength.
Aquasil Ultra+ impression material helps clinicians capture the detail they need and reduce the chance of voids and tears at the margin, the most common impression errors labs see.1 Its ability to capture and maintain detail coupled with precision delivery and optimal work/set times make Aquasil Ultra+ material the no compromise solution to your everyday impression needs.
Aquasil Ultra+ impression material is available in many different Tray and Wash viscosities for all impression techniques.
Benefits
Higher accuracy due to reduced risk of tears by mouth removal on critical margins and thin cross-sections. Less risk for crown adjustment or "retakes". Helps ensure multiple pours at the lab with no compromise to model accuracy.
Helps ensure accurate impression in the presence of moisture. Can be applied to moist preparation, avoiding dessicating the prep and reducing risk of post-op sensitivity. Helps ensure model accuracy and margin fit when poured at the lab.
Plenty of intraoral time (IOT) for the clinical work. Reduced waiting time until material is set and removed. More IOT: More time and convenience for the dentists during material application, less risk for distortion. Short MRT: minimises time for unwanted jaws movements, less wasted wait time for the dentist.
Large variety of consistencies and delivery forms for all impressions needs in all techniques. Special Rigid material is designed for preventing distortion common with double-arch trays.
Due to customer feedback on the material waste in our mixing tips as well as setting issues when customer used low cost mixing tips, Dentsply Sirona introduced a new innovative cartridge and mixing tip delivery system for all Dentsply Sirona conventional impression materials (NCIS = New Cartridge Integrated System). The NCIS consists of new 50ml and 380ml DECA cartridges as well as new mixing and intraoral tips.
This primary packaging change results in several benefits for the end user:
Note: By introducing NCIS, the new innovative mixing tips are only compatible with the new cartridge system.
Designed to improve overall customer experience while optimising performance.
Hydrophilicity, or contact angle, is most important when the material is being dispensed intraorally. Aquasil Ultra+ impression material delivers industry-leading intraoral hydrophilicity. Our extremely low contact angle—while the impression material is uncured—helps ensure an accurate impression in the presence of natural hydration, so over desiccation of the tooth prep isn’t necessary.
The material is designed to avoid trapping fluid from the moment it is syringed in a moist, humid environment, helping alleviate voids and bubbles at or near the margin.
The material continues to work well with moisture after it leaves your office, delivering accuracy at the lab to deliver properly fitting final restorations.
Tears and voids at the margin are the most common errors in impressions. Aquasil Ultra+ impression material reduces the risk of tears when you need it most — at the thinnest thicknesses while removing it from the mouth. Our advanced formula accommodates a wider set of cases, including those using retraction paste and other techniques where minimal retraction occurs.
Patented technology delivers polyfunctional bonds, for the highest intraoral tear strength on the market. This ensures margins stay intact and material is not left in the sulcus.
Labs also need your impression to remain intact. Aquasil Ultra+ material is designed to remain strong after it leaves your office, further ensuring better model and final impression accuracy.
Delivery of your impression material is critically important to the success of your final impression. Aquasil Ultra+ impression material’s patented digit Targeted Delivery System and single-use cartridges get you up to 34% closer to the prepared tooth and put precision placement at your fingertips.
Exceeding the work time of your impression material can lead to distortion, drags, and pulls. Aquasil Ultra+ impression material provides long, clearly labelled intraoral work times so you don’t need to guess how much time you have while working on your patients.
1. Only with the 50mL System
2. When comparing Dentsply Sirona low viscosity impression material in the new red mixing tip versus the old teal mixing tip.
3. Compared to the 13 applications per cartridge using the current teal mixing tip for 50ml XLV wash material.
You're being redirected to Dentsply Sirona USA. Are you sure you want to proceed?
By using this site or downloading materials from this site, you agree that you are a healthcare professional and agree to abide by the terms and conditions set forth in our Privacy Policy and Legal Notice.