VENEER RESTORATIONS WITH MULTILAYER ZIRCONIUM OXIDE LIKE

CEREC MTL® Zirconia

With flexural strength of +850MPa, CEREC MTL® Zirconia is the aesthetic zirconia that delivers the strength you need for the difficult posterior cases while providing natural aesthetics suitable as you move into the smile line.

Pre-Treatment of the Restoration:

  • Sandblast the restoration

Material’s Flexural Strength1:

  • +850MPa

Non-Retentive Restoration

VENEER RESTORATIONS WITH GLASS CERAMIC LIKE

CEREC Tessera™ Blocks

CEREC Tessera™ - Advanced Lithium Disilicate CAD/CAM blocks provide outstanding aesthetics for a truly tooth-like restoration for single-unit full contour crowns, inlays, onlays and veneers. Up to 32% higher biaxial strength for restoration longevity and fast total processing time for greater patient satisfaction and a more profitable procedure.

Pre-Treatment of the Restoration:

  • Etch with hydrofluoric acid
  • Silanize with Calibra® Silane Coupling Agent

Material’s Flexural Strength2:

  • +700MPa

Non-Retentive Restoration


VENEER RESTORATIONS WITH GLASS CERAMIC LIKE

Celtra® Duo Blocks

With crystallites four to eight times smaller than lithium disilicate blocks, Celtra® Duo (ZLS) possesses an ultra-fine microstructure that combines high flexural strength with a high glass content, resulting in an impressive strength and beauty profile. Celtra® Duo can be processed either by mill and fire or mill and polish.

Pre-Treatment:

  • Etch with hydrofluoric acid
  • Silanize with Calibra® Silane Coupling Agent

Material’s Flexural Strength2:

  • 560 MPa (mill and fire)
  • 413 MPa (mill and polish)

Non-Retentive Restoration

  1. 3-point flexural strength
  2. Biaxial flexural strength