Lid options for DAC Universal S

Benefits

Why choose DAC Universal S?

Ease of use

Process safety through automatic program selection. LAN interface for electronical documentation.

Cost-effective and environmentally friendly reprocessing

Low operating and consumption costs – no use of cleaning and disinfection chemicals and only up to 900 ml water consumption per cycle.

Fully automatic reprocessing

Six instruments in approx. 21 minutes; internal and external cleaning, lubrication (if needed) and sterilization of straight and contra-angle handpieces, turbines, ultrasonic / sonic handpieces and tips, nozzles of multifunctional syringes and powder jet devices as well as powder jet handpieces. 

Legal certainty

Cleaning and sterilization process which can be validated. Cleaning process in accordance with EN ISO 15883-1 / -22. Sterilization process in accordance with EN ISO 130602 and ISO 17665-1. Routine Control with chemical indicator class 5 and PCD (Process Challenge Device)

Workflow

This workflow represents a single cycle of the reprocessing of rotating instruments with the Program Pink Lid. With the White Lid, the process is identical but without the lubrication step.

"Reprocessed instruments in next to no time!"

Adapters

This is a selection of adapters for straight and contra-angle handpieces. To view all available adapters, please download the document "Ordering Information - Adapters" found in the Downloads Center. Please check the compatibility list for authorized ultrasonic / sonic handpieces and tips, nozzles of multifunctional syringes and powder jet devices as well as powder jet handpieces.

Downloads

Further downloads are provided within our Download Center.

Contact us

Find out more about infection control systems from Dentsply Sirona.

1. Tested with temperature resistent paraviruses.

2. Does not fully comply with all requirements. Details can be found in the instructions for use, chapter 3.7 "Supplementary information on compliance with EN ISO 15883-1/-2 and EN