Contact Us
Together we can achieve more.
Reach out to learn more about what Dentsply Sirona can do for you.
Crowns & Bridges in the Digital Workflow
Crowns and Bridges are the most frequent restoration types within the fixed prosthetic segment. They can be made of various materials, e.g. dental alloys and all-ceramic materials.
In the field of all-ceramics, zirconium oxide is a leading material. It is an all ceramic (metal free) material and offers excellent properties for dental use: Superior toughness, strength, and fatigue resistance, in addition to wear properties and biocompatibility. Dentsply Sirona was a pioneer in this field with over 20 years experience. Zirconia became popular with introduction as pre-sintered material (Cercon) for efficient and economic production in CAD/ CAM processes. It covers a wide range of indications from single crowns up to 14-unit bridges.
Self-Study Syllabus
Cercon Workflow Training
- Material Selection
- Scan
- Communication
- CAD - Design
- CAM - Milling
- Sintering
- Finishing
- Ceramic Firing
- Cementation
* The accuracy of the results of the inEos X5 with inLab CAD SW 16.0 was verified according to DIN EN ISO 12836.2015. The demonstrated accuracy on standard “bridge” test specimens was at 2.1 ± 2.8 μm, and on standard “inlay” test specimens 1.3 ± 0.4 μm.
1. For validated sinter metal only
2. Optional with the inLab Profire Zirconia + Metal
3. For zirconium oxide; depends on the size of restorations and sinter support
The finishing of all-ceramic restorations is an essential component of esthetics, quality and efficiency
Monolithic with just a glaze, or stain and glaze
The finishing of all-ceramic restorations is an essential component of esthetics and quality.
Cercon Multilayers, Cercon ht ML and Cercon xt ML, can be finished with only a single glaze or by an individual characterization with DS Universal Stain and Glaze.
The seamless layers delivers a natural esthetics and especially in the anterior region Cercon ht ML can be used for covering discolored dies, depending on the degree of discoloration and wall thickness of the restoration.
Cutback up to fully veneered
The cutback technique is particularly suitable for minimal individualization, especially of the incisal area.
With the veneering ceramics Celtra Ceram or Cercon ceram Kiss, detailed individualizations can be carried out specifically and with little effort.
Cercon ht and Cercon xt are particularly suitable for this technique.
If a fully veneered restoration is desired or necessary for various reasons, it can also be fabricated with Celtra Ceram or Cercon ceram Kiss.
Cercon base in particular, but also Cercon ht and Cercon xt are suitable for this technique.
Example: 14-unit bridge, milled in Cercon ht ML, Shade A2, finished with Dentsply Sirona Glaze or Stain & Glaze
Example: Covering of discolored dies with Cercon ht ML, Shade A2
* See manufacturer warranty documents for more details
Find the right cement for your restoration
Whether you are using digital restorations manufactured in a dental lab or chairside in your office, the Dentsply Sirona Dental Cements guide will help you navigate through the type of restoration, different materials, and cement to use for a successful restoration. It will also recommend additional products to use and closes with helpful videos. In addition, you’ll find information about all the products used and links to their website pages for additional resourceful materials.
Choose your indirect restoration type (For Cercon click on Crown/Bridge)
Digital Dentures
Our digital workflows enable you to move from analog to digital production for every denture (premium and economy), delivering capacity, throughput and simplicity.
Lucitone Digital Print Denture Curriculum
Digital learning tools are available at your convenience with on-demand education. Ask your Dentsply Sirona representative for more information about becoming a Lucitone Digital Print Denture certified lab.
