Transferências inLab

O inLab CAM SW 22.2 exige uma licença inLab CAM SW 22. Sem uma licença do software inLab CAM SW 22, o software iniciará num modo de demonstração que permite usar e testar o software, mas não permite a produção. O inLab CAM 22.x usa o serviço CAM, como base de dados, para todos os dados de fabrico, como, por exemplo, modelos e espaços em branco. IMPORTANTE: o inLab CAM 22 importará todos os dados *.cam (modelos) e *.blc (espaços em branco/trabalhos) para a base de dados CAM Service. Depois de os dados serem importados, deixarão de estar acessíveis com o inLab CAM ≤20.x! Certifique-se de que tem as licenças apropriadas instaladas e/ou faça uma cópia de segurança dos seus dados, se pretender usar os dados com inLab CAM ≤20.x!

Please note that in order to run the software you need valid license keys for both the inLab CAD SW 22 as well as for the Basis module. Licenses can be ordered from your Dentsply Sirona Dealer.

inLab CAM SW 22.2 requires the inLab CAM SW 22 license. Without an inLab CAM SW 22 license, the Software will start in a demo mode that allows for using and testing the software but will not allow for production. inLab CAM 22.x uses CAM Service as database for all manufacturing data such as designs and blanks. IMPORTANT: inLab CAM 22 will import all *.cam (designs) and *.blc (blanks/jobs) data into the CAM Service database. Once the data is imported, it will no longer be accessible with inLab CAM ≤20.x! Please make sure, that you have the appropriate licenses installed and/or backup your data if you intend to further use the data with inLab CAM ≤20.x!

Please note that in order to run the software you need valid license keys for both the inLab CAD SW 22 as well as for the Basis module. Licenses can be ordered from your Dentsply Sirona Dealer.

Minimum requirement is an installed inLab CAD SW 22.1.x as well as license keys for both the inLab CAD SW 22 and for the Basis module.

Minimum requirement is an installed inLab CAD SW 22.1.x as well as license keys for the inLab CAD SW 22, for the Basis module and for the Removables module.

Minimum requirement is an installed inLab CAD SW 22.1.x as well as license keys for the inLab CAD SW 22, for the Basis module and for the Removables module.

inLab CAM SW 22.1 requires the inLab CAM SW 22 license. Without an inLab CAM SW 22 license, the Software will start in a demo mode that allows for using and testing the software but will not allow for production. inLab CAM 22.x uses CAM Service as database for all manufacturing data such as designs and blanks. IMPORTANT: inLab CAM 22 will import all *.cam (designs) and *.blc (blanks/jobs) data into the CAM Service database. Once the data is imported, it will no longer be accessible with inLab CAM ≤20.x! Please make sure, that you have the appropriate licenses installed and/or backup your data if you intend to further use the data with inLab CAM ≤20.x!

Please note that in order to run the software you need valid license keys for both the inLab CAD SW 22 as well as for the Basis module. Licenses can be ordered from your Dentsply Sirona Dealer.

Quality improvement and stability - Dentsply Sirona continuously improves the quality of its products. As part of this Service Pack 22.0.1, minor improvements have been made and known software bugs have been fixed. We recommend that you always use the latest software version.

Please note that in order to run the software you need a valid license key for the inLab CAM SW 22. Licenses can be ordered from your Dentsply Sirona Dealer.

Minimum requirement is an installed inLab CAD SW 20.0.2 and license keys for both inLab CAD SW 20.0 and the basis module.

Minimum requirements are an installed inLab CAD SW 20.0.2 and license keys for the inLab CAD SW 20.0, for the basis module and for the Removables module.

Minimum requirements are an installed inLab CAD SW 20.0.2 and license keys for the inLab CAD SW 20.0, for the basis module and for the Removables module.

Minimum requirement is an installed inLab CAD SW 20.0 as well as license keys for both the inLab CAD SW 20.0 and for the Basis module.

Minimum requirement is an installed inLab CAD SW 20.0 as well as license keys for the inLab CAD SW 20.0, for the Basis module and for the Removables module.

Minimum requirement is an installed inLab CAD SW 20.0 as well as license keys for the inLab CAD SW 20.0, for the Basis module and for the Removables module.

Quality improvement and stability - Dentsply Sirona continuously improves the quality of its products. As part of this Service Pack 20.0.4, minor improvements have been made and known software bugs have been fixed. We recommend that you always use the latest software version.

Please note that in order to run the software you need valid license keys for both the inLab CAD SW 20.0 as well as for the Basis module. Licenses can be ordered from your Dentsply Sirona Dealer.

Contains additions/modifications to the following materials: Dentsply Sirona: CEREC Zirconia +, CEREC MTL Zirconia, CEREC Tessera (available worldwide) --- Shofu: SHOFU DISK ZR Lucent Supra, Shofu BLOCK HC SUPERHARD ---GC: CERASMART Prime. Additional PreFace abutments by the following companies can be selected: Dentsply Sirona, MIS, Medentika, Osstem, Straumann. Not all materials may be available in every country.

Quality improvement and stability  -  Dentsply Sirona continuously improves the quality of its products. As part of this Service Pack 20.0.1, minor improvements have been made and known software bugs have been fixed. We recommend that you always use the latest software version.

Please note that in order to run the software you need a valid license key for inLab CAM SW 20.0. Licenses can be ordered from your Dentsply Sirona Dealer.

Here you can download the Connect Case Center Inbox. Important notice.: To activate the Inbox, the latest version of the license manager is required. This version gets automatically installed with the installation of the Inbox itself.

Quality improvement and stability - Dentsply Sirona continuously improves the quality of its products. As part of this Service Pack 20.0.4, minor improvements have been made and known software bugs have been fixed. We recommend that you always use the latest software version.

Quality improvement and stability - Dentsply Sirona continuously improves the quality of its products. As part of this Service Pack 20.0.2, minor improvements have been made and known software bugs have been fixed. We recommend that you always use the latest software version. Minimum requirements are an installed inLab CAD SW 20.0.1 and license keys for both inLab CAD SW 20.0 and the basis module.

Contains additions/modifications to the following materials: Dentsply Sirona: Celtra Duo, Cercon ht ML, CEREC Tessera (Availability regionally restricted. Available worldwide with inLab CAM 20.0.1 in June 2021) --- GC: CERASMART LAYER --- Ivoclar Vivadent: IPS e.max, ZirCAD MT Multi, ZirCAD Prime --- Kuraray Noritake: KATANA Zirconia LT, KATANA Zirconia HTML, KATANA Zirconia HT --- SHOFU: BLOCK ZR Lucent --- VITA: ENAMIC multiColor, SUPRINITY FCt. Not all materials may be available in every country.

Requires an installed inLab CAD SW 19.0.

Requires an installed inLab Partial Framework 19.0.

Requires an installed inLab Splint 19.0.

Requires an installed inLab Model 19.0.

Requires an installed inLab CAD SW 19.0 (only necessary for SW installed in the US)

Requires an installed inLab Partial Framework 19.0.

Requires an installed inLab Splint 19.0.

Please note that in order to run the software you need valid license keys for both the inLab CAD SW 19.0 as well as for the Basis module. Licenses can be ordered from your Dentsply Sirona Dealer.

Please note that in order to run the software you need a valid license key for inLab CAM SW 19.0. Licenses can be ordered from your Dentsply Sirona Dealer.

Minimum requirement is an installed inLab CAD SW 19.0 as well as license keys for both the inLab CAD SW 19.0 and for the Basis module.

Minimum requirement is an installed inLab CAD SW 19.0 as well as license keys for the inLab CAD SW 19.0, for the Basis module and for the Removables module

Minimum requirement is an installed inLab CAD SW 19.0 as well as license keys for the inLab CAD SW 19.0, for the Basis module and for the Removables module.

Minimum requirement is an installed inLab CAD SW 19.0 as well as license keys for both the inLab CAD SW 19.0 and for the Basis module.

Minimum requirement is an installed inLab CAD SW 18.0 or higher.

Minimum requirement is an installed inLab CAD SW 18.0 or higher.

Minimum requirement is an installed inLab CAD SW 18.0 or higher.

Minimum requirement is an installed inLab CAD SW 18.0

Minimum requirement is an installed inLab CAD SW 18.1

Minimum requirement is an installed inLab CAM SW 18.0

Minimum requirement is an installed inLab CAM SW 18.0

Please note that in order to run the software you need a valid license key for the inLab CAD SW 18.0. Licenses can be ordered from your Dentsply Sirona Dealer.