The NitraDem Direct Connect 2 system supplies high-quality demineralized water to the DAC Universal and any other sterilizer at low cost. This highly efficient water treatment system works fully automatically and complies with the European standard EN 1717-5 that allows a direct connection between water supply and sterilizers e.g. DAC Universal. NitraDem Direct Connect 2 supplies up to three machines with purified water, one of which can be fitted with an integrated suction pump, e.g. S1 / S2 / S3 Pureclave.
Benefits
EN 1717 Category 5-compliant for direct connection. Water available on demand to all connected infection control system.
Connection of up to three infection control systems simultaneously.
Simple filter replacement. Compatible with DAC Universal D, DAC Universal S and all standard sterilizers.
Always the right water quality. No quality loss due to storage. Water conductivity is continuously monitored.
NitraDem Direct Connect 2 is not only the easiest but also the cheapest solution compared to other mixed bed systems.
Always the right water quality with a direct water connection. No quality loss due to storage. Water conductivity is continuously monitored.
The new easy-to-replace Silicate filters function according to the ion-exchange principle. The capacity of the Silicate filters varies according to the hardness/softness of the tap water. The softer the tap water, the larger the capacity of the Silicate filter.
NitraDem Direct Connect 2 has three water outlets, from which demineralized water is available at a pressure of 5-6 bar. At outlet A an infection control system can be optionally connected with or without a water suction pump. The system is not recommended for connection to cleaning and disinfection devices. Water outlets B and C are used to connect infection control systems without a water suction pump, e.g. water pistol, DAC Universal S.
Further downloads are provided within our Download Center.