Prepare su Primeprint para impresión 3D
A continuación, puede encontrar la descarga de inLab CAM 22 Software necesario para trabajar con Primeprint. Además, también proporcionamos el software inLab CAD, las aplicaciones inLab y el software CEREC. Para ejecutar el software, necesita una clave de licencia válida. Si tiene preguntas, comuníquese con su distribuidor de Dentsply Sirona.
inLab CAM Software, software inLab CAD y aplicaciones
6 GB
Please note that in order to run the software you need valid license keys for both the inLab CAD SW 22 as well as for the Basis module. Licenses can be ordered from your Dentsply Sirona Dealer.
2 GB
inLab CAM SW 22.3 requires the inLab CAM SW 22 license. Without an inLab CAM SW 22 license, the Software will start in a demo mode that allows for using and testing the software but will not allow for production. inLab CAM 22.x uses CAM Service as database for all manufacturing data such as designs and blanks. IMPORTANT: inLab CAM 22 will import all *.cam (designs) and *.blc (blanks/jobs) data into the CAM Service database. Once the data is imported, it will no longer be accessible with inLab CAM ≤20.x! Please make sure, that you have the appropriate licenses installed and/or backup your data if you intend to further use the data with inLab CAM ≤20.x!
Minimum requirement is an installed inLab CAD SW 22.1.x as well as license keys for both the inLab CAD SW 22 and for the Basis module.
Minimum requirement is an installed inLab CAD SW 22.1.x as well as license keys for the inLab CAD SW 22, for the Basis module and for the Removables module.
Minimum requirement is an installed inLab CAD SW 22.1.x as well as license keys for the inLab CAD SW 22, for the Basis module and for the Removables module.
Actualizar descripciones inLab
Software CEREC
La instalación del software requiere una licencia CEREC SW 5.2.
1 GB
The update CEREC SW 5.2.9 is distributed via AutoUpdate. The update requires a pre-installed CEREC SW 5.2.8.
4 GB
La actualización de CEREC SW 5.2.8 también se distribuye a través de AutoUpdate.
Actualizar descripciones del software CEREC
Software Connect
Aquí puede descargar el software Connect actual. Esta versión es compatible con Primescan AC, CEREC Primescan AC, Omnicam AC y CEREC Omnicam AC (Windows 10). Debido a los diferentes tiempos de aprobación y registro, no todos los productos están disponibles de inmediato en todos los países.
Actualizar descripciones Connect
DI & CAD/CAM Connector
110 MB
Connect your Connect SW, CEREC SW, inLab CAD SW, inLab CAM SW to DS Core
Pruebe casos para Primeprint™ Solution
Recursos de Primeprint
