INLAY/ONLAY RESTORATIONS WITH MULTILAYER ZIRCONIUM OXIDE LIKE

CEREC MTL® Zirconia

With flexural strength of +850MPa, CEREC MTL® Zirconia is the high strength esthetic zirconia that delivers the strength you need for the difficult posterior cases while providing natural esthetics suitable as you move into the smile line.

Pre-Treatment of the Restoration:

  • Sandblast the restoration

Material’s Flexural Strength1:

+850MPa

Non-Retentive Restoration

INLAY/ONLAY RESTORATIONS WITH GLASS CERAMIC LIKE

CEREC Tessera™ Blocks

CEREC Tessera™ - Advanced Lithium Disilicate CAD/CAM blocks provide outstanding esthetics for a truly tooth-like restoration for single-unit full contour crowns, inlays, onlays and veneers. Up to 32% higher biaxial strength for restoration longevity and fast processing time for greater patient satisfaction and a more profitable procedure.3

Pre-Treatment of the Restoration:

  • Etch the inlay/onlay with hydrofluoric acid
  • Silanize with Calibra® Silane Coupling Agent

Material’s Flexural Strength2:

  • +700MPa

Non-Retentive Restoration


INLAY/ONLAY RESTORATIONS WITH GLASS CERAMIC LIKE

Celtra® Duo Blocks

With crystallites four to eight times smaller than lithium disilicate blocks, Celtra® Duo (ZLS) possesses an ultra-fine microstructure that combines high flexural strength with a high glass content, resulting in an impressive strength and beauty profile. Celtra® Duo can be processed either by mill and fire or mill and polish.3

Pre-Treatment of the Restoration:

  • Etch the inlay/onlay with hydrofluoric acid
  • Silanize with Calibra® Silane Coupling Agent

Material’s Flexural Strength2:

  • 560 MPa (mill and fire)
  • 413 MPa (mill and polish)

Non-Retentive Restoration

  1. 3-point flexural strength
  2. Biaxial flexural strength
  3. Internal data on file. For more information, contact Consumables-Data-Requests@dentsplysirona.com