Download now the new inLab SW 19.0
(valid license required to run the software)
Custom abutments, screw-retained bridges and bars, surgical guides. The inLab Software Implantology Module includes all the necessary CAD tools and features for custom restorations on single and multiple implants and for the design of complete surgical guides. For the seamless transfer to the inLab MC X5 and inLab MC XL production units or, alternatively for export to Dentsply Sironaās central production or other production systems.
For more flexibility, the tooth setup and implant superstructure can be designed separately. Teeth can be positioned independently of the implant situation, according to the bite situation and the aesthetics of the case.
The screw-channel tool can be used to generate hole geometries like those for screw access channels. The channels can be freely positioned, and their angle and diameter can be adjusted as required. A handy tool to create, for example, extended directly screw-retained restorations on scanned standard abutments.
Implant-supported bridges and bars can be professionally designed at implant level based on highly accurate inEos X5 scan data. The inLab CAD Software guides operators through the design process one step at a time. The design data set can be sent to infiniDent or as provided as STL export via the inLab Interfaces module for the production using an appropriate CAD/CAM production unit. Alternatively, inEos X5 scan data can also be transmitted to Atlantisā¢ for further design and finalization steps.
Overview of implant systems for screw retained bridges and bars
For in-house production with, e.g., the inLab MC X5 (zirconia or PMMA), directly screw-retained bridges or bars on multi-unit abutments from nt-trading and Medentika are designed with inLab CAD Software. The model scanner inEos X5 determines the exact implant position, using the special inPost scanbody by Dentsply Sirona.
inPost compatibility overview for scanning on multi-unit abutments from nt-trading
inPost compatibility overview for scanning on multi-unit abutments from Medentika
Custom zirconia abutments for adhesive connection to TiBase by Dentsply Sirona (CAD/CAM) are designed either directly or top-down, the fully contoured designs can be split into crown or crown coping and abutment.
It is now possible for the first time with inLab to produce custom one-piece titanium abutments with the inLab MC X5 and Medentika Preface blanks.
With inLab CAD Software, you can design and produce custom surgical guides in your laboratory, quickly and at low cost. Part of the integrated implant planning with the 3D X-ray systems from Dentsply Sirona, the CAD/CAM surgical guide is the ideal basis for planning the surgical procedure.
A prerequisite is an optical impression of the intraoral situation, taken on the working cast (e.g., with the inEos X5) or by way of a digital intraoral impression. In addition, a restoration is designed for implant planning based on prosthetic aspects. These optical data are then exported.*
The optical data are merged with the 3D X-ray data (Orthophos SL 3D, XG 3D, or Galileos) for subsequent implant planning and output as *.cmg.dxd planning file.
The *.cmg.dxd planning file is imported into the inLab CAD software to design the surgical guide.* The design of the surgical guide can be customizedĀ for any span size with one or more drill holes.
The surgical guide can then be milled in-house (e.g. with the inLab MC X5 or inLab MC XL**) or by way of an STL export for production with a 3D printer.***
1 Ā MedentikaĀ® or nt-trading
*Ā The required interface is included in the inLab CAD Software Implantology Module.
**Ā inLab MC XL is limited to drilling surgical guides with a maximum of one drill hole.
*** inLab CAD Software Interface Module required.Ā
Our product services are available to answer technical questions from customers and authorized dealers in German and English from Monday to Thursday from 7:30 a.m. to 5.30 p.m., Friday from 7:30 a.m. to 3:00 p.m. (CEST).
Services:
Phone: +49 (0) 6251 / 16-1670
Fax: +49 (0) 6251 / 16-1818
Our order services are available exclusively to authorized dealers from Monday to Thursday from 7.30 a.m. to 5.30 p.m., Friday from 7:30 a.m. to 3:00 p.m. (CEST).
Services:
Product orders:
Phone: +49 (0) 6251 / 16-1680
Fax: +49 (0) 6251 / 16-1717
Email: order.service@dentsplysirona.com
Spare parts:
Phone: +49 (0) 6251 / 16-1680
Fax: +49 (0) 6251 / 16-1727
Email: spareparts.service@dentsplysirona.comĀ Ā
Spare part clarification
To help us respond as quickly as possible to your inquiry please indicate the general scope of your inquiry in the subject line of your e-mail or fax: āproduct orderā or āspare partsā.
Our Return services are available exclusively to authorized dealers from Monday to Thursday from 7.30 a.m. to 5.30 p.m., Friday from 7:30 a.m. to 3:00 p.m. (CEST).
Services:
Phone: +49 (0) 6251 / 16-1690
Fax: +49 (0) 6251 / 16-1737
Email: return.service@dentsplysirona.com