Prepare your Primeprint for 3D printing
Below you can find the download for the inLab CAM 22 Software required for working with Primeprint. In addition, we also provide the inLab CAD Software, inLab Apps and CEREC Software. In order to run the software you need a valid license key. In case of questions please contact your Dentsply Sirona dealer.
inLab CAM Software, inLab CAD Software & Apps
inLab CAM SW 22.2.0 2 GB
inLab CAM SW 22.2 requires the inLab CAM SW 22 license. Without an inLab CAM SW 22 license, the Software will start in a demo mode that allows for using and testing the software but will not allow for production. inLab CAM 22.x uses CAM Service as database for all manufacturing data such as designs and blanks. IMPORTANT: inLab CAM 22 will import all *.cam (designs) and *.blc (blanks/jobs) data into the CAM Service database. Once the data is imported, it will no longer be accessible with inLab CAM ≤20.x! Please make sure, that you have the appropriate licenses installed and/or backup your data if you intend to further use the data with inLab CAM ≤20.x!
inLab CAD SW 22.1.0
Please note that in order to run the software you need valid license keys for both the inLab CAD SW 22 as well as for the Basis module. Licenses can be ordered from your Dentsply Sirona Dealer.
inLab Model 22.0.2 596 MB
Minimum requirement is an installed inLab CAD SW 22.1.x as well as license keys for both the inLab CAD SW 22 and for the Basis module.
inLab Splint 22.0.2 576 MB
Minimum requirement is an installed inLab CAD SW 22.1.x as well as license keys for the inLab CAD SW 22, for the Basis module and for the Removables module.
inLab Partial Framework 22.0.1 577 MB
Minimum requirement is an installed inLab CAD SW 22.1.x as well as license keys for the inLab CAD SW 22, for the Basis module and for the Removables module.
inLab Software 22.1.0 Update Description
This document describes changes and improvements compared to previous version inLab CAD 22.0.1 & inLab CAM 22.0.0
Update Descriptions inLab
inLab CAM Software 22.2.0 Update Description 382 kB
inLab Software 22.1.0 Update Description 2 MB
This document describes changes and improvements compared to previous version inLab CAD 22.0.1 & inLab CAM 22.0.0
inLab CAD & CAM SW 22.0.0 Update description
This document describes changes and improvements compared to previous version inLab CAD 20.0.4 & inLab CAM 20.0.1
CEREC Software
Software installation requires a CEREC SW 5.2 license.
CEREC SW 5.2.4 1 GB
The update CEREC SW 5.2.4 is also distributed via AutoUpdate.
CEREC SW 5.2.3 4 GB
The update CEREC SW 5.2.3 is also distributed via AutoUpdate.
Update Descriptions CEREC
Update Description CEREC SW 5.2.4 184 kB
Update Description CEREC SW 5.2.4
Update Description CEREC SW 5.2.3 171 kB
Connect Software
Here you can download the current Connect Software. This version supports Primescan AC, CEREC Primescan AC, Omnicam AC, and CEREC Omnicam AC (Windows 10). Due to different approval and registration times, not all products are immediately available in all countries.
Connect SW 5.2.4 2 GB
Connect SW 5.2.4 Update
Connect SW 5.2.3 2 GB
Connect SW 5.2.3 Update
Connect SW 5.2.2
Connect SW 5.2.2 Update
Update Descriptions Connect
Connect SW 5.2.4 Update Description 163 kB
Update description for Connect SW 5.2.4
Connect SW 5.2.3 Update Description
Download Center
Visit the Download Center to find Instructions for use, safety data sheets, eMDR documents, and more.